Seeding Your
Garden Starter Tray
(Continued)
Drop seeds into the
Dibble
with your fingers
or tweezers.
Mark
Seeding Plan
to indicate which
Grow
Sponges
are planted.
Repeat steps until all
Grow Sponges
for that
seed type are planted.
Return unused seeds to packet.
HELPFUL HINTS:
To avoid losing track of where you are on the
Seeding Plan
:
• Plant all of one seed type at a time.
• Start planting seeds on one side of the
Tray
and work your way across (rather than jumping around).
• Remember to check off each
Grow Sponge
on the
Seeding Plan
as you get it planted. (This way if you
get distracted, you’ll know where you stopped!)
• If you accidentally put in an extra seed or two, don’t worry. There is still plenty of room for seeds to
germinate and plants to grow.
3
4
5
6
9
Place Seeds in
Grow Sponge
To avoid confusion, work with only one seed type
at a time.
Empty contents of 1 seed packet onto a
piece of paper or clean work surface. For
larger seeds, you may be able to grab seeds
right from seed packet.
Count out the number of seeds needed
for one
Grow Sponge
. For example, take
4 seeds if you are planting beets. (Use the
table on page 7 of this Guide to help you
decide the number of seeds to plant in each
Grow Sponge
.)
It is important to seed your
Grow Sponges
and get the
Tray
into your AeroGarden on the same
day. Otherwise, the seeds will start germinating without the benefit of moisture, warmth and
light provided by your AeroGarden.
1
2
