ELECTRICAL CONNECTION
This product must be properly grounded. Do not modify the plug provided. If it will
not fi t the outlet, have the proper outlet installed by a qualifi ed electrican.
If repair or replacement of the cord or plug is necessary, do not connect the ground-
ing wire to either fl at blade or terminal. The wire with insulation that is green with
or without yellow stripes is the grounding wire. Check the condition of the power
supply wiring. Do not permanently connect this product to wiring that is not in good
condition or is inadequate for the requirements of this product. Failure to follow
these instructions can result in death, fi re or electrical shock.
Model with a power supply cord:
This product must be Earthed. For 220/240 volt circuits connect power supply cord
Earthing plug to a matching Earthed socket. Do not use an adapter.
In the event of and electrical short circuit, Earthing reduces the risk of electric shock
by providing an escape wire for the electric current. This product may be equipped
with a power supply cord having a Earth wire with an appropriate Earth plug. The
plug must be plugged into an outlet that is properly installed and Earthed in accord-
ance with all local codes and ordinances.
Check with a qualifi ed electrician or serviceman if the Earthing instructions are not
completely understood, or if you are not sure whether the product is Earthed. Do not
modify the plug provided. If it will not fi t the outlet, have the proper outlet installed
by a qualifi ed electrician.
Model that is permanently wired:
This product must be connected to a Earthed, metallic, permanent wiring system, or
an equipment Earthed terminal or lead on the product. Power supply wiring must
conform to all required safety codes and be installed by a qualifi ed person. Check
that supply voltage agrees with that listed on product nameplate.
Extension cords:
Use only a 3-wire extension cord that has a 3-pin Earthed plug. Connect extension
cord plug to a matching 3-slot socket. Do not use an adapter. Make sure your exten-
sion cord is in good condition. Check that the wire gauge of the extension cord is the
correct size wire to carry the current this product will draw. An undersized cord is a
potential fi re hazard, and will cause a drop in line voltage resulting in loss of power
and will cause the product to overheat.
Summary of Contents for OIL - LESS COMPRESSOR
Page 11: ......
