2 |
P a g e
The bottle brackets should be secured by grade 5 bolts and washers. The socket cap bolts provided allow you to bolt the bracket from
underneath. Before drilling the holes be sure to check for clearance beneath the mounting surface, i.e., fuel tank, fuel lines, and brake lines
etc. When mounting these brackets ensure it is on a flat, stable and structural location.
•
Ensure when mounting bottle to provide enough support underneath when the bottle is full
•
Make sure there are no sharp edges or objects near the bottle that could penetrate in an event of an impact.
•
Recommended to mount away from excessive heat, moving components and collision prone areas
For more information or technical enquires
Contact: Aeroflow Performance on