Page 50/79 – v2.9
Cabling
1.
Plug the USB-Jack cable in the “
USB In”
connector
2.
Plug the signal to synchronize in the “
Sync Ext in”
SMA connector. (only for external
signal synchronization). If signal to synchronize is internally generated, no signal needed
on “
Sync Ext in”.
3.
Plug the reference signal (i.e. the signal on which “Sync Ext In” signal or “internal signal”
will be synchronized with) in the “
Pulse In”
SMA connector
4.
The synchronized signal will output on the “
Pulse Out
” SMA connector
5.
Finally, plug the power supply to the “
Power In
” connector to power on the board
synchronized signal
Output signal
Reference
signal
Signal to
synchronize
USB-Jack Cable
Power Supply
Summary of Contents for TOMBAK
Page 19: ...Page 19 79 v2 9...
