Page
13
of
15
OM‐GermZone100‐01 Rev D
6.
Remove the lamp cover assembly from the chassis.
7.
Gently remove the lamps from the retaining clips inside the cover.
8.
Remove the lamps from the lamp cover.
CAUTION:
Do not to hit the lamps against the metal housing, as this may cause breakage.
UV Lamps, like all fluorescent lamps, contain mercury and must be handled
carefully.
9.
Reverse the above procedure to install the new lamps and reassemble. During reassembly,
ensure no wires are captured between the lamp cover and the chassis.
10.
Remount the GermZone® 100 on the wall mount plate.
11.
See Discarding Used Lamps in Additional Information Section for information on the
disposal of the old lamps.