8
AeroForce F2B
Installation Instructions
Step 2a
Installing Manual Fixed Roll Up Bar
1) Figure 8-1.
Unbolt and remove the shafts from both ends of fixed manual roll up bar (1).
2)
On the driver's side align the fixed manual roll up bar (1) with the bearing, insert the shaft with the keyway
through the bearing.
3)
Bolt the shaft using the 1/4-20 x 2 1/4 hex bolt and 1/4-20 nylon hex nut removed in
Step 2a.1
.
4)
On the passenger's side align the fixed manual roll up bar (1) with the bearing and insert shaft through the
bearing.
NOTE:
Make sure there is clearance on the outside of end plate of tarp housing to allow shaft to
stick out far enough.
5)
Bolt the shaft using the 1/4-20 x 2 1/4 hex bolt and 1/4-20 nylon hex nut removed in
Step 2a.1
.
Index
Description
Qty
1
Fixed Manual Roll Up Bar
1
1/4-20 x 2 1/4 Hex Bolt
1/4-20 x 2 1/4 Hex Bolt
1/4-20 Nylon Hex Nut
1/4-20 Nylon Hex Nut
Shaft with Keyway
Figure 8-1
