manualshive.com logo in svg

aero pure ABF110DCMH-SG5, Installation Instructions Manual

Share
Download
aero pure ABF110DCMH-SG5 Installation Instructions Manual Download Page 2

UNPACKING

Unpack and carefully remove the unit from carton.

Refer to the supplied accessories list to verify that all parts are present.

SUPPLIED ACCESSORIES

DESCRIPTION

1

Grille

2

1

1

5

Wire 

Protector 

Nut

Suspension

bracket

assembly

Long screw

(ST4X30)

Installation

instructions

1

These bath fan models are listed by ETL under ETL file No.5011292.

These bath fan models use a Sirocco fan driven by a brushless DC motor.

The motor is designed to have an extended service life with reduced energy consumption.

The grille covering the fan body is a spring-loaded, quick attach type. A damper for preventing air 

counterflow is provided. 

The suspension bracket assembly can be used for both new and retrofit situation. 

The light uses a bright SMD LED.

or

or

or

  

ABF110DHG5      ABF110DHG6     ABF110DHL5      ABF110DHL6      ABF110DCMH-SG5   ABF110DCMH-SG6

or

or

Summary of Contents for ABF110DCMH-SG5
















Reviews:

No comments

Brands by name

Popular brands

Load more brands