Manual selection, installation and maintenance
4
Roof-top units -
RTE series
-
This manual is an integral
part of the documentation
enclosed with the unit.
It must be preserved for
future reference and must
accompany the machine throughout its
life.
The manual defines the purpose for
which the machine has been built and
establishes its correct installation and
the limits of its use.
• This manual provides all the
t e c h n i c a l i n s t r u c t i o n s a n d
instructions for the installation
of this unit and the main accident
prevention regulations.
Read carefully and thoroughly all the
information referred to in this manual.
Pay particular attention to the usage
instructions accompanied by the words
"DANGER" or "WARNING" because, if
not observed, they can cause damage
to the machine and/or property and/or
injury to people.
If any malfunctions are not included
in this manual, contact the local After
Sales Service immediately.
• AERMEC S.p.A. declines all liability
for any damage due to improper
use of the machine or the partial or
superficial reading of the information
contained in this manual.
• The installation and the maintenance
must be done by expert and qualified
personnel.
THE MANUFACTURER DECLINES ALL
LIABILITY FOR DAMAGE TO THINGS
OR INJURY TO PERSONS AND
ANIMALS CAUSED BY THE FAILURE
TO OBSERVE THE INSTRUCTIONS
AND STANDARDS IN THIS MANUAL.
Even though during the design phase of
the RTE unit adequate assessment of the
risks was made, pay ATTENTION to the
pictograms on the machine that helps
the reading the manual by drawing the
reader's attention rapidly to the risk
situations that cannot be avoided or
sufficiently limited by using measures
and technical means of protection.
GENERAL HAZARD SIGNAL
C a r e f u l l y a d h e r e t o a l l
the indications next to the icon.
Failure to comply with the instructions
may generate hazardous situations
with possible damage to the health
of the operator and user in general.
DANGEROUS ELECTRICAL
VOLTAGE SIGNAL
Carefully adhere to all the indications
next to the icon.
The signal indicates components of the
unit or, in this manual, specifies actions
that could generate electrically-related
risks.
G E N E R A L P R O H I B I T I O N
SIGNAL
Carefully adhere to all the
indications next to the icon that limit
actions in order to guarantee better
operator safety.
I T I S P R O H I B I T E D TO
CLEAN, OIL AND GREASE,
repair or manually adjust
parts in motion.
INFLAMMABLE MATERIAL.
MAIN WARRANTY
CONDITIONS
• The warranty does not include
payment for damage due to the
incorrect installation of the unit by
the installation engineer.
• The warranty does not include
payment for damage due to the
improper use of the unit by the user.
• The manufacturer does not consider
itself liable for accidents to the user
or the installer due to the incorrect
installation or improper use of the
unit.
The warranty is not valid when:
• the services and the repairs have
been carried out by non-authorised
personnel or companies;
• the unit has been repaired or
modified in the past with non OEM
spare parts;
• the unit has not been adequately
maintained;
• if the instructions described in this
manual have not been followed;
• if non-authorised modifications have
been made.
Note:
The Manufacturer reserves the right at
all times to make any modification for
the improvement of its product and is
not obliged to add these modification
to machines of previous manufacture
that have already been delivered or are
being built.
The warranty conditions are any
subject to the general sales conditions
at the moment the contract is finalised.
General norms
