6
INXWPY. 1610. 4438880_01
1.
GENERAL WARNINGS
NXW AERMEC is built according to recognised technical standards and safety
regulations. They have been designed for air conditioning and hot water
production and must be used for this purpose in accordance with their
performance characteristics. The company shall not be contractually or non-
contractually liable for any damage to people, animals or objects, for failures
caused by errors during installation, adjustment and maintenance or incorrect
use. All the uses not expressly indicated in this manual are not allowed.
1.1.
STORAGE OF THE
DOCUMENTATION
Deliver the following instructions plus all the complementary documentation
to the system user, who shall be responsible for keeping the instructions so
that they are always available when needed.
Read carefully this chapter; all the procedures must be carried out by qualified
personnel according to the regulations in force in the different countries (M.D.
329/2004).
The unit must be installed in such a way as to make all maintenance and/or
repair operations possible.
The warranty of the device does not in any case cover costs owing to ladder
trucks, lifts or other lifting systems that may be required in order to carry out
repairs under warranty.
Do not modify or tamper with the chiller as this may cause dangerous situations
and the manufacturer shall not be liable for any damages. The warranty shall
not be valid if the indications mentioned above are not observed.
1.2.
SAFETY PRECAUTIONS
AND INSTALLATION
−
the chiller must be installed by an authorised and qualified technician,
in compliance with the national legislation in force in the country of
destination (MD 329/2004).
Aermec shall not be held responsible for any damage whatsoever
resulting from the non-compliance with these instructions.
−
Before starting any work, it is necessary TO READ CAREFULLY THE
INSTRUCTIONS, AND TO PERFORM THE SAFETY CHECKS TO AVOID ANY
RISKS. All the personnel in charge must be aware of the operations and
the risks that may arise when all the unit installation operations begin.
2.
PRODUCT
IDENTIFICATION
NXW are identified by the following:
−
PACKAGING LABEL
that includes the product identification data
−
TECHNICAL PLATE
Placed on the right strut side
(see fig.1)
NB
If the identification plate, or any other means to identify the product, is
tampered with, removed or missing, installation and maintenance operations
are hampered
fig.1 technical plate
TARGHETTA
TECNICA
TECHNICAL
PLATE
