aerione AER-PUR815, User Manual, Page: 12 / 24

12
USING YOUR AIR SANITIZER
Power ON/OFF
The power icon turns red when the
product is plugged to a power outlet. Unit is
on standby mode but still OFF.
Gently pressing the power button once
produces an audible ring tone followed by
the button turning green . Unit is now
ON.
to n n ne
To turn the unit off and return to standby
mode, just press again .
The unit then goes thru a 30 second system
cycle that ends with the display panel
showing whatever is the PM2.5 particle
reading during start up.
At this point the button lights up,
indicating that the machine (by default) is
now on Automatic Mode.
Mode Select
Pressing this button in sequence will set
the the machine thru the following modes
of operation:
Adjusts the wind speed depending
on the air quality detected.
Auto
Negative ion generator is turned on.
Turbo
Wind speed is adjusted to maximum.
Sleep
Wind speed is adjusted to the lowest
level and indication lamp is turned
off .
Wind speed will not be controlled by
the air quality sensor.
Speed Select
Pressing this button in sequence will cycle
the machine into 3 diff erent wind speeds
Note that the fan motor speed will only
be adjusted manually once this button is
pressed (i.e., will not be controlled by air
quality sensor.
Child Lock
While the unit is on, pressing gently this
button for 5 seconds lights it up and locks
the machine at its current confi guration.
Once activated, all other function keys will
be none operational.
To turn of the locked condition, press and
hold button for 5 seconds.
Timer
Press to manually set the number of hours
of operation (1 - 12). Button lights up
when activated.
A quick fi rst and second press sets the
timer to 1 hr. Each succeeding press adds
an extra hour until 12 hrs is reached after
which it goes back to zero.
To check for timer time remaining, press
once and the display panel will show the
time left in minutes.
Note: Unit will automatically turn off
when the front cover is removed or is
improperly placed.