8
CONTROL BUTTONS
Turns the unit on or off .
Machine is GREEN when on
and RED when on standby.
Machine goes into automatic
mode the fi rst time it is
powered up, activating both
the negative ion generator
and sterilizer. Wind speed
adjusts automatically
depending on the particle
sensor reading.
Turns off when wind speed is manually
changed.
Controls the number of
hours the machine will be
in operation. Choice of 1
to 12 hours with hourly
increments.
Anion generation is auto
activated the fi rst time the
unit is powered up. Simply
press the icon to turn off or
on this feature.
UV sterilization is
automatically activated the
fi rst time the unit is powered
up. Simply press the icon to
turn off or on this feature.
A reminder feature to
indicate what fi lter needs
to be cleaned or replaced.
After every 320 hrs, this
icon will fl ash to indicate
that fi lter #1 requires
cleaning. When done, press button for 5
seconds to reset.
After every 1500 hours, icon will again
fl ash to indicate that fi lters #2 and #3
need to be replaced. Once done, press
button for 5 seconds to rest.
A gentle tap turns off
all lamps then switches
the motor speed to the
lowest level.
Note:
when in Auto mode, the unit will go to
“sleep” two minutes after the ambient
light is detected at <5 lux. It will then
return to Auto mode three minutes after
>5 lux is detected.
Gently pressing once holds
to whatever is the current
operational setup, while
disabling all other buttons.
To turn off , press for 5
seconds.
Press “-” or “+” to
either reduce or
increase the wind
speed.
Once changed, Auto mode will turn
off and wind speed will not change
irregardless of the air particle sensor
reading.
Also used to check the number of
working time in hours. Pressing once will
show (thru the digital display) two sets of
numbers in succession:
•
1st: hour (in thousands)
•
2nd: hours (in hundreds)
Ex.: fi rst (1), 2nd (525) = 1,525 hrs
To deactivate, tap on any button then
press sleep button within 5 seconds.