802.11 2.4Ghz Low-Power 5dBi Vertical Collinear Antenna
Figure 18. Applying epoxy into the top end of the radome.
Place the cap on top of the radome, turn over and hold upside down until epoxy sets as shown in Figure 19.
Figure 19. Holding the antenna on the cap until epoxy cures.
Congratulations! You have completed the antenna kit. The antenna should be let to cure overnight before being installed. If you
have any further questions, feel free to contact us at [email protected] or check our web site, www.aerialix.com for errata,
updates to this documentation or information on other products.
(C) Aerialix 2002 (12 of 13)
