Aereco S-CO2 Installation And Operating Instructions Manual Download

Page: 6 / 8

CAUTION!

Never connect the 12 VDC supply to S1 or S2 and the 0 V supply

to GND, otherwise S1 and S2 output will be crashed.

A protection is implemented to protect the product in case of wrong

connection, when the following mistakes occur:

∙Inversion of the supply wires (GND and V+).

∙12 V supply connected to S3 and S4 and 0 V supply on GND.

Summary of Contents for S-CO2

Page 1: ...TF5701_B_v1_web CO2 AMBIENT AIR SENSOR INSTALLATION AND OPERATING INSTRUCTIONS ENGLISH S CO2 ...

Page 4: ...llowing recommendations keep the sensor away from any direct solar radiation keep the sensor away from draughts door window supply etc avoid placing the sensor in dead zones behind curtains furniture keep the sensor away from heat sources and from occupants if the sensor is located at the ceiling keep it away from any air supply unit C B D C B D A ...

Page 6: ... supply to GND otherwise S1 and S2 output will be crashed A protection is implemented to protect the product in case of wrong connection when the following mistakes occur Inversion of the supply wires GND and V 12 V supply connected to S3 and S4 and 0 V supply on GND ...

Page 8: ...sor is manufactured in Germany MAINTENANCE Check frequently that the product is clean and remove dust if needed No calibration required Caution Never touch the sensing element white pastille on the sensor otherwise the detection may be damaged WARRANTY The product is guaranteed two years Its validity is submitted to conformed installation use and maintenance ...