Aercus Instruments™
- WS3085
6 |
P a g e
received (this may take several minutes) or the outdoor sensor learning mode will be
terminated. When the outdoor transmitter has been registered the Base Station will
automatically switch to the normal display mode from which all further settings can be
adjusted by the user.
Note:
When replacing batteries in the transmitter wait two minutes before re-
inserting for a full reset.
Wind Direction
On body of the sensor, there is a mark representing West. The wind direction sensor
must be adjusted so that the orientation of the sensor matches your real location. A
permanent wind direction error will be introduced when the wind direction sensor is not
positioned correctly during installation.
Batteries
Good quality non-rechargeable Alkaline or Lithium batteries are recommended.
Note:
Many rechargeable batteries are 1.2V and as such are not suitable for this unit
which requires 1.5V batteries. Rechargeable batteries also often leak their peak
charge quickly which can cause reduced transmission range. As such we recommend
avoiding the use of rechargeable batteries. Lithium batteries are recommended for cold
climates and for optimal performance.
Note:
Incorrectly inserting the batteries may cause a fault and invalidate the
warranty so take care to insert them with the correct polarity
Low Battery Indicator
In some circumstances, the transmitter low battery indicator
may illuminate
when temperatures are outside the range of 10-35°C. This does not necessarily
indicate low batteries and will switch off once the temperature returns to this range (also
see note above on the use of Alkaline batteries).
Setup - Sensors