27
4.9 RUN INPUT SETTING
Button
Description
Back to the previous screen
Back to the Home Page
Change
Run Input contact activation: if active, pin #7 of the motor connector must be connected to pin #4 to start the
rotation
Selection of the fan number
Alarm Modbus: the symbol is displayed and blinks if one of the fans does not communicate on the Modbus network.
Touching it, the “Alarm identification” screen of the faulty fan is accessed (paragraph 4.4)
4.10 SYSTEM INFORMATION
Button
Description
Back to the previous screen
Back to the Home Page
Language
Set
Language selection (English or Italian)
Buzzer
Set
Setting of the buzzer: can be “on sensitive”, “no beep” or “everywhere”
Backlight
Set
Setting of the backlight: can be always “on” or turn-on “time”
Backlight
timeout
Set
Backlight duration when “time” setting is active (adjustable between 5÷240 seconds). The backlight turns off
after the time in expired.
Firmware
Firmware information
Modbus
When Active connect pin7 to pin4 to
start the motor
WARNING
Current status:
Not Active
Set
Run input
Language:
English
Set
Firmware:
01.03.01.AA.00
Buzzer:
on sensitive
Set
Backlight:
on
Set
Backlight timeout:
60s
Set
Modbus
Summary of Contents for CTRL-HS
Page 28: ...004997 00 1020 ...
