10
AD1400A
High volume circulation fans
INDEX
1.
GENERAL INFORMATION
10
2.
PRECUTIONS
10
3.
TYPE
10
4.
MAIN
FEATURES
11
5.
DATA
11
6.
DIMENSIONS
AND
CLEARANCES
11
7.
COMPONENTS
12
8.
INSTALLATION
12
9.
WIRING
DIAGRAM
14
9.1
CTRL-A
(accessory
on
request)
14
9.2 CONTROL WITH EXTERNAL POTENTIOMETER (not supplied)
14
9.3
CTRL-XWS
(accessory
on
request)
15
9.4
CTRL-XTHI
(accessory
on
request)
15
10.
CLEANING
15
11.
TROUBLESHOOTING
16
11.1
Connection
parameters
16
11.2 Modbus registers - Input registers
16
11.3 Alarm codes / led status / troubleshooting
16
12. DECLARATION OF CONFORMITY AND INCORPORATION
17
EN
1. GENERAL INFORMATION
Carefully read the instructions contained in this manual.
This Specific Manual MUST be read in conjunction with the “Installation, Operation and Maintance General Manual”.
Note: store the manual for future reference. We reserve the right to improve and make changes to the manual, products and
accessories without any obligation to update previous productions and manuals.
The installation and service of the unit and complete ventilation system must be performed by an authorized installer and in
accordance with local rules and regulationid.
2. PRECAUTIONS
In addition to the precautions indicated in the “Installation, Operation and Maintenance General Manual” special attention should
be paid to the following warning notes:
-The fan must be installed at a height of not less than 2.7m from the floor below. Installation at a lower height is
considered “improper use”. In case of “improper use” the manufacturer declines all responsibility for any damage
that may be caused to persons or property, and any warranty will be considered invalid.
- Check/inspect and eventually retighten all the fixing annually.
- Fans should not operate in case of strong wind (≥ 6m/s).
The installer and the building owner are responsible to ensure the safety of the fan mounting system and that the fan installation
is correct, in compliance with any national and local regulations.
Table 1
Use the values shown in the table to tighten all the screws.
RECOMMENDED BOLT TORQUE FOR COARSE THREADED METRIC STEEL BOLTS TE-TCEI GRADE 8.
3. TYPE
Ceiling fans with EC brushless motor designed for industrial, civil and zootechnical applications, where high performance are
required.
Dimensions
M6
M8
M10
M12
M14
M16
Nm
9,5
23
46
79
127
198
Summary of Contents for AD1400A
Page 1: ...Manuale Specifico 2 Specific Manual 10 IT EN AD1400A ...
Page 18: ...18 NOTE ...
Page 19: ...19 NOTE ...
