AERA EVO-10C, User Manual, Page: 4 / 78

4
CHAPTER 1
- The user should report within 8 days of production defects or defects, in terms of
the validity of the warranty, immediately upon the detection of defects, device will
be stopped
- As explained in the instruction for use and maintenance, the warranty is valid as
long as the devices are periodically maintained.
- Consumables that are periodically changed during the warranty period must be
originally supplied from AERA.
- Warranty does not apply to consumables, eg filters.
Issues to be Considered by Customers Related to Warranty
The AERA service personnel or the services authorized by AERA should intervene
for the devices covered by the warranty. Damage caused by installation mistakes
or by unauthorized persons is not covered by the warranty.
The following conditions are not covered by warranty:
- Damage due to transportation and improper placement.
- Damage caused by operating the device outside the operating conditions.
- Damage caused by the use of spare parts not approved by the manufacturer.
- Damage due to improper electrical connections, connection other than that
specified on the electrical diagram label.
- Damage and failures due to factors such as impact, breaking, scratching and
freezing.
- Faults that may arise from irregularities in the electrical supply where the device
is installed.
- Damage caused by failure to make drainage pipe and to be corrosion inside the
device.
- Damage that may be caused by the corrosive and acidic effect of the environment
in which the device will operate.
- Damages caused by foreign materials forgotten in the device or fan motor.
- Damage caused by not using flexible connection in channel connections.
- Damages caused by failure to observe the points specified in this user manual.
AERA heat recovery devices do not have any parts replacement or repair work to
be performed by the user other than cleaning and eye inspection. Users should
contact the AERA company for faults detected during operation or maintenance.
1.3 Regulations – Guidelines
If the product is installed correctly and used to its intended purpose, it conforms to
all applicable CE standards at its date of manufacture. The AERA EVO-C ventilation
units in this series are compliant with Eco-Design 2018.