4
3. Controls and Connections
2. Safety Instructions
The following guidelines shall help minimize the risk of inju-
ry through fire or electric shock.
1. Carefully read these safety notes before you use the de-
vice!
2. Keep these safety notes in a safe place.
3. Pay attention to all warnings, instructions and additional
texts on the unit.
4. Do not install or use your device in close proximity to wa-
ter or if you are wet yourself.
5. Use your device in a safe place where nobody can step on
cables or trip over and damage them.
6. Always pull the mains plug before cleaning your device.
Use only a dry cloth for cleaning. Avoid the use of deter-
gents and do not let any liquids seep into the unit.
7. Never install your device close to units with strong elec-
tromagnetic fields such as large mains transformers, re-
volving machines, neon illumination etc. Do not lay signal
cables parallel to power current cables.
8. There are no user-serviceable components inside the
unit. To avoid the risk of an electric shock, the unit must not
be opened. All maintenance, adjustment and repair works
should be carried out by qualified staff only. Any unautho-
rized tampering will void the 2-year warranty.
9. In keeping with the EMV regulations screened cables with
correctly fitted connectors must be used for all signal con-
nections.
10. Always use an earthed power supply with the correct
mains voltage. If you are in doubt about the power outlets
ground, have it checked by a qualified technician.
11. Cable up your device only when it is powered off.
Top Side
gain
input level control
clip
overload indicator
line/mic
signal source selector switch (combo socket):
line:
(only via jackplug) for instruments
(pickup) and other line level sources
mic:
(only via XLR-connector) for microphones
DI level
DI signal level control
volume
line out signal level control
phase
phase invert switch
tone
tone balance circuit
balance
tone balance emphasis control
intensity
tone balance level control
enhancer
harmonic enhancement
intensity
enhancer level control
off/on
enhancer activation switch
equalizer
parametric filter network
level
level control
bandwidth
filter bandwidth control
frequency
filter frequency control
f1/f2
filter frequency range switch
Front Side
input
signal input, combo socket for 6,3 mm
mono jackplug and XLR-male-connectors
power
on/off status indicator
Rear Side
dc 24 V
power supply connector socket (24 Volt DC)
24 V phan-
24V phantom power switch
tom power
line out
signal output, 6.3 mm mono jack socket
DI-out
signal output, symmetrical, XLR socket
Summary of Contents for The Acoustic People pocket tools colourizer
Page 1: ...1 pocket tools colourizer user manual ...
Page 10: ...10 notes ...
Page 11: ...11 notes ...