background image

9

5.5 Battery operation and care

The battery in your 

CompactMobile

2

 is a high-end 

leakproof and maintenance-free lead-gel-battery. 
It‘s high capacity will be available for a long time if 
you follow some precautionary measures.

1. Charging

To charge the battery, plug your AER 

CompactMo-

bile

2

 to the mains and switch it on. If you do not 

want to use the amplifier during the charging pro-
cess, turn 

gain-

 and 

master-

control to minimum vo-

lume (as far left as possible).
The charging of the batteries will be indicated by 
the yellow 

charge-

LED. The battery is fully charged 

when the 

charge-

LED is off. Charging time depends 

on various factors and can vary according to the 
battery’s charging state at the beginning of the pro-
cess.
A partly discharged battery will be charged comple-
tely after a few hours whereas the charging process 
of a completely discharged battery can last more 
than 24 hours. The average charging-time of a con-
tinually discharged battery will take about 8 to 14 
hours. By constantly controlling the battery’s vol-
tage, the intelligent charge control electronics pre-
vents the battery from overcharge.

2. Operation

A completely charged battery allows 2 to 4 hours of 
playing independent of mains supply, depending 
on volume and dynamics. Low volume will enable 
you to play up to 8 hours. The 

low-battery-

LED indi-

cates that the battery is almost empty.
As soon as the minimal allowed battery voltage has 
been reached, the charge control electronics will 
automatically switch the AER 

CompactMobile

2

 off, 

in order to avoid deep-discharge. After the amplifier 
has been switched off by the charge control elect-
ronics it can only be operated when connected to 
the mains. A discharged battery should be charged 
as soon as possible. Storage in discharged condition 
may damage the battery.

3. Storage and self-discharge

If your AER 

CompactMobile

2

 is stored or not used 

over a long period, the battery should be fully char-
ged in order to keep it‘s capacity. Being switched off 
for a long time with discharged battery may damage 

the battery irreparably by natural self-discharge. 
During normal use, the charge control electronics 
can protect the battery from deep-discharge, but 
it cannot prevent the electronical process of self-
discharge in the battery itself.
Always store your AER 

CompactMobile

2

 with char-

ged battery. A fully charged lead-gel-battery will 
still be 60% charged after one year of storage whilst 
a discharged battery might be damaged even after 
a few weeks.

4. Temperature Dependency

Please note that the battery’s capacity (and thus 
playing time) depends on the surrounding tempe-
rature. Playing outside in winter will reduce playing 
time by 20 to 30% compared to playing in heated 
rooms or outside in summer. This is a normal reac-
tion and not a sign of a defective battery.

5. Battery Life Expectancy

The producer of the batteries used in the AER 

Com-

pactMobile

2

 declares a life period of approximately 

5 years at intended use.

6. Warranty

Batteries are items that wear out through the or-
dinary course of use, thus they are excluded from 
statuary two-year liability. If a defect has not been 
caused by AER manufacture, warranty will expire af-
ter 6 months.

7. Battery Exchange

The exchange of worn out batteries should be car-
ried out by a specialist or by AER Service as both 
amplifier and new battery could be severely dama-
ged through improper connecting or assembly. Im-
proper connection may cause explosion or electric 
shock.

PB

Summary of Contents for Compact Mobile2













Reviews: