TIP:
If you want your NanoMote to be a security device that use secure/encrypted
message to communicate in a Z-Wave network, then a security enabled Z-Wave
controller is needed
.
Ⅳ
. Z-WAVE NETWORK EXCLUSION
To remove the
NanoMote
from the Z-Wave network:
1.
Insert the LIR2450 battery.
2.
Place the device within the direct range of your Z-Wave controller.
3.
Set the main controller remove mode (see the controller’s manual).
4.
Double click the button quickly, the LED indicator should blink fast.
5.
Wait for the removing process to end.
6.
Successful adding will be confirmed by the Z-Wave controller’s message.
V .Security features of NanoMote One in Z-Wave network
7.
The following is a list of supported command classes:
8.
1.The node info frame supports:
COMMAND_CLASS_ZWAVEPLUS_INFO
V2
COMMAND_CLASS_SECURITY
V1
COMMAND_CLASS_SECURITY_2
V1
COMMAND_CLASS_TRANSPORT_SERVICE
V2
2. Security Command Supported Report Frame:
COMMAND_CLASS_VERSION
V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC
V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO
V1
COMMAND_CLASS_ASSOCIATION
V2
COMMAND_CLASS_BATTERY
V1
COMMAND_CLASS_WAKE_UP
V2
COMMAND_CLASS_POWERLEVEL
V1
COMMAND_CLASS_CONFIGURATION
V1
COMMAND_CLASS_SUPERVISION
V1
COMMAND_CLASS_FIRMWARE_UPDATE_MD
V3
COMMAND_CLASS_DEVICE_RESET_LOCALLY
V1
COMMAND_CLASS_CENTRAL_SCENE
V3
COMMAND_CLASS_MARK
V1
COMMAND_CLASS_SWITCH_MULTILEVEL
V2
VI. LOW BATTERY ALARM FUNCTION
NanoMote One will send battery report to the lifeline group when button is triggered during the
sleep mode. If the battery level of the NanoMote One is less than 20%, the NanoMote One will
!
