13
Mounting the gang box.
4.
Position all wires to provide room for the
device. Place the Nano Switch inside the gang
box towards the back of the box.
Position the antenna towards the back of the
box, away from all other wiring.
Reinstall the Nano Switch to the gang box.
Reinstall the cover onto the gang box.
a.
b.
c.
d.
20
Note: This is the physical connection diagram for
AC120V/230V power input.
Security or Non-security feature of your Nano
Switch in Z-Wave network.
Including Nano Switch as a non-secure device:
If you want your Nano Switch as a non-secure
device in your Z-Wave network, press the Action
Button once on Nano Switch when you pair it to
your gateway. If inclusion is successful, the green
LED will be on for 2 seconds, and then return to a
solid indication. If inclusion is unsuccessful, the red
Automatic reports are sent to association group 1,
which is setup via the Association Command Class.)
Please consult the operation manual for these
control points for specific instructions on monitoring
the Nano Switch.
1
2
3
Note: The model ZW139 Nano Switch does not
have the ability to monitor energy consumption. The
model ZW116 Nano Switch supports the energy
metering feature and you can see the words “with
Energy Metering” on its packaging box.
Summary of Contents for Nano Switch
Page 2: ......
