AeonAir RPAC12EF, Manual, Page: 7 / 36

5. Install the window panel (P) by expanding
it to fit the length of the window and fully
tightening the pre-assembled screws in
the middle.
7. Plug the unit into a 115V/60Hz grounded
electrical outlet.
7.8 in.
7.8 in.
Important :
Place the unit at least away from the wall. 7.8 in.
7
Screw come attached
Screw come attached
Horizontal window
Vertical window
Q
T
6.Take the remote control (Q) out of remote
control holder (T). Remove the remote control
holder (T). Align the exhaust nozzle to the air
outlet (F) and slide into the back of the unit.
Note:
Always remove the remote control holder
before installing exhaust nozzle connector.Put
the remote control holder back after installation.