Assembly and Use Instructions for
TV Mount and Wall Furniture Shelf System
Model Number: AEON-80101
Page
12
Figure 2-1
Figure2-2
Step
【
2
】
Configure Universal Adapter
Improper installation can lead to mount falling causing severe personal injury or damage to
equipment. It is installer’s responsibility to make sure the combined weight of all components
does not exceed weight capacity of 125lbs (56.7Kg).
Configure the assembly universal adapter
1.
If the hole on the back of your display monitor falls within the Universal Adapter (
12
), you do
not have to remove or relocate the Universal Adapter Vertical Rails.
2.
If applicable, determine a suitable mounting location on display monitor, place again the
vertical rails on Universal Adapter (
12
) and tighten the screws to achieve the desired location.
(
See
Figure 2-1)
3.
The assembly Universal Adapter (
12
) can be adjusted and aligned out on both sides. (
See
Figure 2-2
) The Assembly Universal Adapter (
12
) can be adjusted in width from 200mm to
550mm. (7.9” to 21.6”). Set the width of the vertical rails to match the mounting holes on
your TV.
Summary of Contents for 80101
Page 1: ......