2/26/2018
MultiSensor 6 user guide. : Aeotec by Aeon Labs
https://aeotec.freshdesk.com/support/solutions/articles/6000057073-multisensor-6-user-guide-
11/11
You can find the article for the custom device handler here: https://aeotec.freshdesk.com/solution/articles/6000063247-using-
multisensor-6-with-smartthings-hub-s-custom-device-type
(https://aeotec.freshdesk.com/solution/articles/6000063247-using-
multisensor-6-with-smartthings-hub-s-custom-device-type)
The article contains the github code, and information used to create the article. If you need help installing the custom device handler,
please contact support about this.
Troubleshoot your Multisensor 6.
If you are seeing issues with your Multisensor 6s multiple sensors, there are a few troubleshooting steps that you can take to make
them work depending on if your gateway will allow you to.
Troubleshoot Motion Sensor.
(https://aeotec.freshdesk.com/solution/articles/6000156713-troubleshoot-multisensor-6-motion-
sensor)
Troubleshoot the Multisensors 4 other sensors (Light, Humidity, Temperature, UV).
(https://aeotec.freshdesk.com/solution/articles/6000156717-troubleshoot-multisensor-6-sensors-light-humidity-temperature-uv-)
More Advanced Configurations.
You can find more advanced configurations for Multisensor 6 in our Engineering Sheet section on our Freshdesk which can be used to
integrate Multisensor 6 into a new gateway or software, or use it as a reference for configurations.
1. Multisensor 6 (V1.06)
(https://aeotec.freshdesk.com/helpdesk/attachments/6053297237)
2. Multisensor 6 (V1.07)
(https://aeotec.freshdesk.com/helpdesk/attachments/6053297238)
3. Multisensor 6 (V1.08)
(https://aeotec.freshdesk.com/helpdesk/attachments/6053297241)
