manualshive.com logo in svg

Aeon Labs AEO HEM2-100A, Quick Start Manual, Page: 6 / 10

Share
Download
Aeon Labs AEO HEM2-100A Quick Start Manual Download Page 6

Minimum Change to send Report (%) for the whole HEM (Parameter Number 8, Parameter Size 1) 

The value represents the minimum change in Watage Percent for a report to be sent 

Value

Description

0 — 255 % (Default 10)

Minimum Change to send Report (%) for clamp 1 (Parameter Number 9, Parameter Size 1) The value 

represents the minimum change in Watage Percent for a report to be sent 

Value

Description

0 — 255 % (Default 10)

Minimum Change to send Report (%) for clamp 2 (Parameter Number 10, Parameter Size 1) The value 

represents the minimum change in Watage Percent for a report to be sent 

Value

Description

0 — 255 % (Default 10)

Minimum Change to send Report (%) for clamp 3 (Parameter Number 11, Parameter Size 1) The value 

represents the minimum change in Watage Percent for a report to be sent 

Value

Description

0 — 255 % (Default 10)

Enable /disable reporting CRC-16 Encapsulation Command (Parameter Number 13, Parameter Size 1) 

Value

Description

0

Disabled (Default)

1

Enabled

Set 101-103 to default (Parameter Number 100, Parameter Size 1) 

Value Description

(c) 2012 Z-Wave Europe GmbH, Goldbachstr. 13, 09337 Hohenstein-Ernstthal, Germany, All rights reserved, www.zwaveeurope.com - pp 6 

Summary of Contents for AEO HEM2-100A











Reviews:

No comments