Operation Instructions
- 4 -
- 3 -
Temperature Setting
Ventilation
1. Press the Start button for Heater.
2. Press and see SP green light to start setting.
4. Press to return.
Note:
a. Default heating temperature is 38℃.
b. When no operation, the value shown is for current temperature.
Press to see set value.
c. The heating temperature cannot be set over 40℃.
3. Press to set temperature. Stop setting and the figure will stop flashing.
OUT in yellow says setting confirmed
they have been given supervision or instruction concerning use of the product by a
person responsible for their safety.
Children should be supervised to ensure that they do not play with the product.
4 .DO NOT modify, disassemble or repair.
5. Avoid using the product in dusty, vibrating and wet environment and in chemical
storage place.
Unlock and lock the door
Magnetic Latch
Pull the handle to unlock and push the door back for automatic locking.
Power on
Plug in and press the “RESET” button on the back of the plug.
Press the Start button for Ventilation Fan and the ventilation fan on the back will
start working.
Rotate the clover-shaped acrylic plate to unblock the ventilation holes on the door.
