04
05
Specifications
Electrical Parameters
Safety Warning
WMS-1501-MT
WARMOLOGY MAT
（
Optional Accessory
）
1. The best solution available for Convalescent Animal Normothermia maintenance.
2. The fabric will remain dry and warm for extended periods of treatment during ventilation and fluid
transfusion.
Allowing the patients to avoid the pain and discomfort of eczema, bedsores (pressure ulcers), Reliev-
ing possible irritation to the patient’s skin which could cause skin problems, especially when patient’s
activities have been restricted in a cage where the mat or floor is wet for a longer than normal period.
This mat is an ideal choice to help create a 24/7 dry and warm environment for animals. This
significantly helps the healing process.
3. Made from patent pending fabric with cubic honeycomb structure, provides 3D support to the
patient’s body (40 points per square centimetre), filtering dirt in dense fibres.
1. Flexible, easily moulded to suit different sized animals.
2. The sterilized warm air will provide much better ventilation. Also significantly lower the risk of
infection.
3. Definitely a very good choice for young animal incubation.
4. Machine washable, easy to clean, eco-friendly (SGS approved).
5. No electric hazard risk, (no electric wires are used internally), preventing possible injury from
exposure to liquids and chewing.
All maintenance and repairs should be carried out by qualified authorized trained technicians.
All animal care should be supervised by a qualified licensed veterinarian.
If the unit starts to make a continuous noise, please contact an Authorized service centre.
The machine housing can be wiped clean with a mild cleaning agent that is non-abrasive.
Dimension
Noise Level
Filtering and sterilization
Negative ion
Weight
Vent Hose
Suggested filter replacement cycle
Suggested Operation Environment
Relative Humidity
Altitude
Warming time
Temperature Control Tolerance
Storage and Transportation Temperature
30cm×22cm×36cm (12” ×8.65” ×14”)
49dB (high speed)
43dB (low speed)
Three tiered filtering system
0.2μm HEPA filter
254nm ultraviolet sterilization light
6×106Pcs/cm3±10%
6.14kg (13.52lbs)
Food class, flexible, sensor inside.
2 months or over 120 hours
Temperature: -20°C -30°C
35% -80%
≤3200m
2 -8 minutes
±1.0°C
-10°C -45°C
PTC, 800W
45W
110V /95CFM
220V /78CFM
110V /26mmAq
220V /18mmAq
Porcelain Fuse
Heating Element
Fan Motor
Air Volume
Wind Pressure
Fuse
Regulation
Rotational Speed
Rated Current
Rated Fuse
IEC60601
110V /3540RPM
220V /3945RPM
12A (110 -120VAC)
8A (220 -240VAC)
15A (125VAC)
8A (250VAC)
