Installation and Operation Manual
AENO
TM
electric blender
©
ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.2, aeno.com
Page
45
of
47
8 Glossary
Class II
The electrical safety class in which protection against electric
shock is provided by the use of double or reinforced insulation.
No enclosure grounding is required. The plug does not have a
grounding contact.
S.S304
AISI 304 (The American Iron and Steel Institute) austenitic steel
with low carbon content. AISI 304 stainless steel is acid resistant
and can withstand short-term temperature rise up to 900
°C
.
ABS plastic
Shock-resistant technical plastic, widely used in the
manufacture of household products.
PP plastic
Food grade polypropylene plastic. It has high strength and heat
resistance, safe in contact with any food.
Borosilicate glass
Silicate glass, where the alkaline components in the raw
material are replaced by boron oxide. It differs from
conventional glass by its higher thermal resistance and
increased resistance to mechanical damage.
WEEE
Waste Electrical and Electronic Equipment means used
electrical or electronic equipment, including all components,
subassemblies, consumables that are part of the equipment at
the time it is taken out of service (including batteries (if any),
components containing mercury, etc.)
