Installation and Operation Manual for
the AENO TB2 electric blender
©
ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.1, aeno.com
Page
31
of
44
A description of the operation of each program is given in paragraph 1.5.4 "Operation
mode of the device". Each of the programs automatically adjusts the time of the
program, the speed of the knife mechanism and the temperature of heating. It is not
possible to independently set the temperature, cooking time and speed of the knife
mechanism in the TB2 model. However, each program can be terminated prematurely
by holding down "ON/OFF" button for 3 seconds.
NOTE
The model of the multifunctional electric blender AENO TB3 allows you to adjust
the speed of the knife mechanism. For more information about the TB3, visit
aeno.com.
When you have finished using the device, turn it off with the "ON/OFF" button and
unplug the power cord from the power outlet. Make sure that the blade mechanism
does not rotate and remove the blender jug from the blender body. Open the large lid
of the jug, remove the cooked food.
Figure 13
–
Extracting the finished product
Summary of Contents for ATB0002
Page 2: ......