ELECTRICAL SPECIFICATIONS
Nominal Range:
150A
Measurement Range:
0.1 to 150A
Transformation Ratio:
Voltage output
Output Signal:
10mV/A
Accuracy and Phase Shift*:
Accuracy:
0.1 to 1A:
3% Reading ± 200µV
1 to 20A:
2% Reading ± 200µV
20 to 80A:
1% Reading
80 to 150A:
3% Reading
150 to 200A:
7% Reading
Phase Shift:
0.1 to 1A:
Not Specified
1 to 20A:
3°
20 to 80A:
2°
80 to 150A:
3°
150 to 200A:
4°
(*Reference conditions: 18°C to 28°C, 20 to 75%
RH, external magnetic field <40 A/m, 48 to 65 Hz
sine wave, distortion factor less than 1%, no DC
component, no external current carrying conductor,
test sample centered.)
Load impedance > 1 M
.
Frequency Range:
40 to 10kHz
Limit Operating Conditions:
200A permanently to 1kHz;
Derating above 3kHz: 200A x (1/0.333F), F in kHz
Crest Factor:
3 @ 150A peak max with an error
(due to CF) of 3%
Overload:
240A for 10 min ON, 30 min OFF
Working Voltage:
600Vrms
Common Mode Voltage:
600Vrms
Influence of Adjacent Conductor:
< 15mA/A at 50 Hz
Influence of DC on AC signal:
DC Current < 10A, < 10%
Influence of Conductor Position in Jaw:
0.5% of mV output @ 50/60 Hz
Influence of Frequency:
40 Hz to 1 kHz: 5% of mV output
1 kHz to 10 kHz: 15% of mV output
Influence of Load:
< 3% of mA output from 40 Hz to 1 kHz
< 12% of mA output from 1 kHz to 10 kHz
Influence of Temperature:
200 ppm/°K, or 0.2% of mV output per 10°K
Influence of Humidity (10 - 90% RH):
0.2% of mV output per 10°K @ 18°C to 28°C
MECHANICAL SPECIFICATIONS
Operating Temperature:
14° to 131°F (-10° to +55°C)
Storage Temperature:
-40° to 158°F (-40° to +70°C)
Operating Relative Humidity:
10-35°C 85% RH
(without roll-off above 35°C)
Maximum Cable Diameter:
One Ø 0.78” (20mm), bus bar 20 x 5mm
Case Protection:
IP 40 (IEC 529)
Drop Test:
Test per IEC 68-2-32:
1.0m drop on 38 mm of Oak on concrete.
Mechanical Shock:
Test per IEC 68-2-27
Vibration:
Test per IEC 68-2-6
Dimensions:
5.47 x 2.00 x 1.18" (139 x 51 x 30mm)
Weight:
180 g (6.5 oz)
Polycarbonate Material:
Jaws: Polycarbonate with 10% fiberglass charge,
Red UL 94 V0
Case: Polycarbonate 920A Gray
Opening Operations - Life:
> 50,000
Output:
MN352:
Two standard safety banana jacks (4mm)
MN353:
Double/reinforced insulated 5 ft (1.5m)
lead with safety 4mm banana plug
SAFETY SPECIFICATIONS
Electrical:
Double insulation or reinforced insulation between
the primary or secondary and the outer case of
the handle conforms to IEC 1010-2-32.
Common Mode Voltage:
600V Category III
Pollution Degree 2
Dielectric Strength:
5550 V, 50/60 Hz between primary, secondary
and the outer case of the handle
Electromagnetic Compatibility:
EN 50081-1 Class B
EN 50082-2 Electrostatic discharge
IEC 1000-4-2
Radiated field IEC 1000-4-3
Fast transients IEC 1000-4-4
Magnetic field at 50/60 Hz IEC 1000-4-8
ORDERING INFORMATION
AC Current Probe MN352
..........
Cat #2116.26
AC Current Probe MN353
..........
Cat #2116.27
Both models include a user manual and a
product warranty and registration card.
Accessories:
Leads, set of 2, 5 ft safety
(1000V) for Model MN352 ............
Cat #2111.29
Banana plug adapter
(to non-recessed plug) ................
Cat #1017.45
E192383
2.56"
(65 mm)
5.47"
(139 mm)
.83"
(21 mm)
Black
Red
.73"
2.00"
(51 mm)
(18.5 mm)
.1.18"
(30 mm)
Tactical
Barrier
(keep hands below
this barrier)
www.
ShopAEMC
.com
Shop for AEMC products online at:
1.877.766.5412
