background image

4

 

Infrared Thermometer Model CA879

1.2  Definition of Measurement Categories

CAT I:  

Measurement category I corresponds to measurements taken on circuits 

not directly connected to the network.

CAT II:

  Measurement category II corresponds to measurements taken on cir-

cuits directly connected to the installation.

 

Example: 

measurement for electrodomestic units, portable tools and 

analogue devices

CAT III:

  Measurement  category  III  corresponds  to  measurements  on  building 

installations.

 

Example: 

measurement on distribution panels, cabling, etc.

CAT IV:

  Measurement category IV corresponds to measurements taken at the 

source of low-voltage installations

 

Example:

 metering and measurements on overvoltage protection de-

vices.

1.3  Receiving Your Shipment

Upon receiving your shipment, make sure that the contents are consistent with the 

packing list. Notify your distributor of any missing items. If the equipment appears 

to be damaged, file a claim immediately with the carrier and notify your distributor 

at once, giving a detailed description of any damage. Save the damaged packing 

container to substantiate your claim.

1.4  Ordering Information

Infrared Thermometer Model CA879

.............................................

Cat. #2121.37

Includes soft carrying case, 9V battery and a user manual.

1.4.1  Accessories and Replacement Parts

Soft Carrying Case

 .........................................................................

Cat. #2121.57

www.

GlobalTestSupply

.com

Find Quality Products Online at:

[email protected]

Summary of Contents for CA879














Reviews: