10
Fault Mapper Model CA7024
4.5
Programming a Custom Library Location
To program a custom library location, enter the
Set-up
mode (see § 4.4).
Press the
TEST /
button to select Edit Library; the line selector (>) should
be at Edit Library.
Press the
Vp
or
Vp
button to enter the library programming mode.
• The Model CA7024 will display the first programmable cable loca
-
tion in the library.
• The factory setting for each location is
Custom Cable X
with a
Vp
= 50%
, where X is location 1 through 15.
Press the
Vp
or
Vp
button to choose a cable location to program.
--- Choose Cable ---
Custom Cable 1
Vp = 50%
Next, press the
TEST /
button enter the
Choose Character
mode.
--- Choose Character ---
Custom Cable 1
Vp = 50%
• The arrow cursor will point to the first character.
• Fifteen characters are available for cable naming.
Press the
Vp
or
Vp
button to move the selection cursor to the left or right
respectively. Once the desired character is selected, press the
TEST /
button to enter the
Edit Character
mode.
Next, press the
Vp
or
Vp
button to change the character at the selec-
tion point.
www.
.com
1.800.561.8187
