background image

Quick Tester Model 8505

 

15

4.4  limited Warranty

The Quick Tester Model 8505 is warranted to the owner for a period 

of two years from the date of original purchase against defects in 

manufacture. This limited warranty is given by AEMC

®

 Instruments, not 

by the distributor from whom it was purchased. This warranty is void if 

the unit has been tampered with or abused, or if the defect is related to 

service not performed by AEMC

®

 Instruments. 

Full warranty coverage and product registration is available on our 

website at: 

www.aemc.com

Please print the online Warranty Coverage Information for your records.

What AEMC

®

 Instruments will do:

If a malfunction occurs within the warranty period, you may return the 

instrument to us for repair, provided we have your warranty registration 

information on file or a proof of purchase. AEMC

®

 Instruments will, at its 

option, repair or replace the faulty material.

REGISTER ONLINE AT:

 

www.aemc.com

4.5  Warranty Repairs

What you must do to return an Instrument for Warranty Repair: 
First, request a Customer Service Authorization Number (CSA#) by 

phone or by fax from our Service Department (see address below), then 

return the instrument along with the signed CSA Form. Please write the 

CSA# on the outside of the shipping container. Return the instrument, 

postage or shipment pre-paid to:

Ship To: 

Chauvin Arnoux

®

, Inc. d.b.a. AEMC

®

 Instruments

 

15 Faraday Drive

 

Dover, NH 03820 USA

 

Phone: (800) 945-2362 or (603) 749-6434  (Ext. 360)

 

Fax:  (603) 742-2346 or (603) 749-6309

 

E-mail: [email protected]

Caution: 

To protect yourself against in-transit loss, we recommend you 

insure your returned material.

NOTE: You must obtain a CSA# before returning any instrument.

Summary of Contents for 8505

















Reviews: