NTA01-001 Motorola Series Radio Adapter
SM71 Installation and Operation Manual
June 12, 2012 Rev: 5.00
Page 2-3
ENG-FORM: 805-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
2.3.5.3 Performance
Checks
If any preset requires adjustment, be sure this is carried out before the aircraft leaves, and that the unit
and its mating connector are secured before departure. Make all required log book entries, electrical
load, weight and balance amendments and other paperwork as required by your local regulatory agency.
Upon satisfactory completion of all performance checks, make the required log entries and
complete the necessary Regulatory Agency paperwork before releasing the aircraft for service.
2.3.6 Adjustments
The unit is shipped from the factory with all internal adjustments set to the normal test levels. Once
installed in the aircraft, it may be desirable to change some of these settings to best suit the local
operating environment.
The internal adjustments that can be varied can be found on the top of the rear subassembly after
removing the cover of the unit, and are mic level, sidetone, and RX level, as shown above.
These levels can be adjusted using the rotary pots. Rotating the pots clockwise increases the levels, and
counterclockwise decreases the levels.
2.4 Continued
Airworthiness
Maintenance of the NTA01-
001 is ‘on condition’ only. Periodic maintenance of this product is not required.
2.5
Accessories Required But Not Supplied
Installation kit p/n NTA-IKC (crimp) is required to complete the installation. The kit consists of the
following:
Quantity Description
AEM
Part
#
1
TNC Coax Connector
20-55-225
1
NTA Mounting Tray
NTA-VT1
1
D-min 25 Pin Female Crimp Installation Kit
D25SV-IKC
AEM Part #
D25SV-IKC
consists of:
Quantity Description
AEM
Part
#
1 D-min
25
Socket
housing
20-21-025
25
MS Crimp Socket
20-26-901
1
25 pin JVL Hood/Locklever
20-29-250
MIC LEVEL SIDETONE RX LEVEL
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number(ECCN) EAR99. When exporting, diversion contrary to U.S. law is prohibited.