manualshive.com logo in svg

AEM CD-5, User Manual

Share
Download
AEM CD-5 User Manual Download Page 52

52

·

If the cursor is at the left or right edge of the gauge the cursor changes to an E-W cursor 

 and is resized

by dragging that side

To resize a gauge using the edit window:

·

Show  the 

Gauge Property

 window by right clicking on the selected gauge or by selecting it from the 

Edit

 menu.

·

Change the values of the 

x size

 and 

y size

 properties to appropriate values.

This is useful in making different gauges the same size.

Deleting a Gauge

To delete a gauge:

·

Select the gauge.

·

Press  the 

Delete

 key.

Editing Gauge Properties

The gauge property editor is used to change the settings of an individual gauge. The gauge property editor is shown
using either the mouse or 

Edit

 menu. Using the mouse:

·

Select the gauge.

·

Click the right mouse button.

To edit a gauge using the menu:

·

From  the 

Edit

 menu, select the name of the gauge to edit.

The gauge property editor is specific to the type of gauge being edited. See the 

Gauge Reference

 section for full

details.

Using Copy and Paste

The copy and paste feature is used to copy gauges or entire screens between screen pages or setup files.

·

Edit | Copy | Gauge

 copies the currently selected gauge into the paste buffer.

·

Edit | Copy | Screen

 copies the current screen into the paste buffer.

·

Edit | Paste | Gauge

 pastes the last gauge copied into the paste buffer into the current screen.

·

Edit | Paste | Screen

 pastes the last screen copied into the paste buffer into the current screen. Any gauges

already present on the current screen will be removed.

To paste a gauge or screen into a different setup file, copy it, close the file, open the appropriate setup file and
screen and paste.

Setting the Gauge Z Order

When a page is rendered in the display, the gauges are drawn in the order in which they were added to the screen in
the editor.

When gauges are placed on top of other gauges, it can be useful to change the order in which the gauges are drawn
(the Z order). For example, if an alarm bar is added over a value gauge, only the alarm bar will be visible. By
changing the Z order so that the value gauge is drawn after the alarm bar, the value gauge will appear drawn on the
alarm bar.

To change the Z order on a page, select 

Edit | Z Order... or press Ctrl Z

. The Z order editor will be shown. To

change the order of a gauge, select it from the list (it will be simultaneously highlighted in the screen editor) and use

Summary of Contents for CD-5

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands