LSA800-001 Loud Speaker Amplifier
Installation and Operation Manual
February 23, 2015 Rev: 1.00
Page 2-1
ENG-FORM: 805-0100.DOTX
CONFIDENTIAL AND PROPRIETARY TO ANODYNE ELECTRONICS MANUFACTURING CORP.
Section 2.0 Installation
2.1 Introduction
Information in this section consists of: unpacking and inspection procedures, installation procedures,
post-installation checks, and installation drawings.
2.2
Unpacking and Inspection
Unpack the equipment carefully. Inspect the unit visually for damage due to shipping and report all such
claims immediately to the carrier involved. Note that each unit should have the following:
- LSA800-001 Loud Speaker Amplifier
- Product Information Card
- Certificate of Conformity or Release certification
Verify that all items are present before proceeding and report any shortage immediately to your supplier.
2.2.1 Warranty
All Anodyne Electronics Manufacturing Corp. (AEM) products are warranted for 2 years. See the website
www.aem-corp.com/warranty for complete details.
2.3 Installation
Procedures
2.3.1 Warnings
WARNING:
When the amplifier is connected to an appropriate speaker, the system
is capable of producing high sound pressure levels. Proper personal
protective equipment is required to prevent hearing damage.
2.3.2 Cautions
CAUTION:
Do not obstruct ambient air flow to the heatsink fins.
Do not operate the unit outside of the parameters listed in the
Electrical Specifications section.
Always check ADF and compass calibration after installing external speakers
or power amplifiers.
