5
e. Place heat shield into factory lower air box. Do not
secure clips until intake tube is in place.
f. Install included straight hose coupler onto filter adapt-
er and secure with provided hose clamp.
g. Install hump hose coupler onto throttle body and se-
cure with provided hose clamp.
h. Install intake tube at throttle body first, then at air
filter. Adjust tube position in couplers for best fit, then
secure by tightening hose clamps. Secure heat shield
using factory clips at this time.
i. Connect factory EVAP and crank case vent connections
to fittings on intake tube.