3
Read and understand these instructions BEFORE attempting to install this product. Failure to follow installation
instructions and not using the provided hardware may damage the intake tube, throttle body and engine. If you
need any assistance please call1-800-858-3333 to speak with a representative in our Customer Service Center
before returning the product.
1. Preparing Vehicle
a. Make sure vehicle is parked on level surface.
b. Set the parking brake.
c. If engine has run in the past two hours, let it cool down.
d. Disconnect negative battery terminal.
e. Do not discard stock components after removal of the factory system.
f. Open the air intake kit package and make sure all parts are included.
2. Removal of stock system
a. Pull up on engine cover to remove from rubber
grommets.
b. Disconnect both battery terminals, remove bolt that
holds battery strap, then remove battery from vehicle.
c. Unplug the Mass Air Flow sensor electrical
connector.
d. Remove the 4 bolts that hold the battery tray, the
bolt for the ground cable to chassis, and the one bolt
for the air box scoop. BOLTS WILL BE REUSED IN
STEP 3d.
Tools Needed:
Screwdriver
8, 10mm Socket
Socket Driver
Pliers
4mm Hex Key
Floor Jack
Jack Stands