l)
Attach MAF assembly to the upper inlet pipe, the
flow arrow on the MAF sensor should be pointing to
the upper inlet pipe.
k)
Attach reducer couplers and 3 hose clamps to the
MAF assembly. The flow arrow is pointed to the right
on the MAF sensor.
m)
Insert the second inlet pipe. The bracket will
be inserted underneath the tab on the power
steering reservoir.
10
n)
This is the hardware that attaches the heat
shield to the mounting surface. 1 ¼-20 bolt, ¼”
washer, heat shield spacer, and ¼-20 nut.
o)
Insert the bolt and washer from underneath the
rubber grommet. Insert the heat shield spacer and
secure with the nut.
