Page 08
Please read the instructions carefully prior to installation
DGXDSDV112 -
DigiSender® XDHDMI - Single Input HDMI AV Sender System
(EN) ENGLISH
Installing your DigiSender® XDHDMI
Step 5 - Test your Setup Using the Test Mode
Your DigiSender® XDHDMI is set to Test Mode by default and will aid you in getting the best possible
picture and help identify any problems that may arise during installation.
Turn on the receiving TV, and select the HDMI chan-
nel assigned to the HDMI Input that you plugged
the DigiSender® Receiver in to.
This may be labelled
as SOURCE, INPUT, AUX, AV, VIDEO, VCR or
.
4.
Switch on the source equipment (Satellite, Free-
view, DVD, VCR, etc.).
1.
Turn on the DigiSender® Transmitter by pushing the
Power button on the front of the unit.
The Power
Indicator will change from Red to Green to indicate
that the unit is switched on.
2.
Turn on the DigiSender® Receiver by pushing the
Power button on the front of the unit.
The Power
Indicator will change from Red to Green to indicate
that the unit is switched on
3.
