Please read this instruction manual carefully prior to installation
Page 13
DG180-S - Wireless Video Sender System
TROUBLESHOOTING
Problems Controlling the Source Equipment
If you have any difficulty operating your source equipment remote control in your second room
please follow the advice below below:
1) Ensure the IR Emitter is connected to the socket labelled ‘IR’ on the xSender™ Transmitter.
2) Ensure you are using the correct remote control in the second room. For instance, if you are try-
ing to control your Satellite Receiver you will need to use the Satellite remote control.
3) Ensure the IR Emitter is facing the Infra Red remote control pick up point on your source equip-
ment.
4) Move the IR Emitter further away from the source equipment.
5) Move the xSender™ Transmitter AND xSender™ Receiver further away from other electrical
devices.
6) Try operating your source remote control closer to the xSender™ Receiver.
7) Replace the batteries in your source remote control.
Summary of Contents for DG180-S
Page 19: ......
