EXP-HDBASET-100
Receiver Panel
1.
POWER LED: This LED will illuminate when power adapter plug in EXP-
HDBASET-100 TX.
2.
HDMI LED : This LED will illuminate when TX connect compatible RX and
HDMI signal start to transmission.
3.
LINK LED : This LED will illuminate when TX connect compatible RX and RJ45
signal start to transmission.
4.
DC IN : 5VDC / 2.0 Amp Locking Power Jack
5.
RJ45 : Connect to EXP-HDBASET-100 Transmitter with single Cat.6 cable for
HDMI, IR Blaster, IR Receiver signal transmission.
6.
HDMI OUT : Connect to HDMI sink devices, such as LED/LCD Monitor,
LED/LCD TVs, Projector and AV Receiver
.
7.
IR RX : Receiving IR signal to remote control HDMI source devices via IR
Receiver Cable.
IR TX : Transmitting IR signal to remote control HDMI sink devices via IR
Blaster Cable.
