1
SAFETY INFORMATION
Read the following safety information carefully before attempting
to operate or service the meter.
To avoid damage to the instrument do not apply voltages that
exceed the maximum limits shown in the technical specifications
tables.
Do not use the meter or test leads if they look damaged. Use
extreme caution when working around bare conductors or bus
bars.
Accidental contact with the conductor could result in electric
shock.
Use the meter only as specified in this manual; otherwise, the
protection provided by the meter may be impaired.
Read the operating instructions before use and follow all safety
information.
Caution when working with voltages above 60V DC or 30V AC
RMS. Such voltages pose a shock hazard.
Before taking resistance measurements or testing continuity,
disconnect circuit from main power supply and all loads from the
circuit.
