4KPROIP-CBS
Quick Start Guide
3
Ensure the network switch is configured correctly before connecting any Encoders or Decoders to it.
Netgear M4300 series are pre-configured for Multicast right out of the box, so no configuration is
required to correctly operate the system.
If your specific switch is not listed then choose one close to it as a guide as most settings will be the
same to configure your switch.
Step 2: Once the switch is configured, Encoders or Decoders can be connected along with the SDVoE
Director Controller.
A PC running a browser (Google Chrome is recommended) will also need to be connected to gain access
to the Director User Interface.
1 Network Switch Configuration
2 System Installation