14
8. BASE SEttinGS
8.1 Eco mode
By operating the phone in Eco mode the power emissions level can be reduced.
When the Eco mode is set to ON, the base transmission power will be reduced.
This feature is set to OFF by default.
1. Press , scroll
to
« AdVAnCEd SEt »
and press
OK
.
2. The display shows
« ECO MOdE »
, press
OK
3. Press
/
to select
« On »
or
« OFF »
.
4. Press
OK
to confirm or to return to the previous menu.
Note: When ECO mode is set to ON, the handset range will be reduced.
8.2 Zero Emission (Eco +)
When Zero emission is activated and the unit has been idle for 1 minute the
transmitted power between the handset and the base will stop. An incoming call
or pressing any key on handset will activate the unit and it will revert back to the
normal mode. This feature is set to OFF by default.
1. Press , scroll
to
« AdVAnCEd SEt »
and press
OK
.
2. Scroll
to
« ZERO EMit »
, press
OK
.
3. Press
/
to select
« On »
or
« OFF »
4. Press
OK
to confirm or to return to the previous menu.
8.3 Restore default settings
The phone can be restored to its default (original) settings. All the handsets that
are registered to the base will be retained and not deleted.
IMPORTANT
Resetting the phone to its default settings will delete all entries in the Call
list. Current handset and base settings will also be reset. Entries stored in the
phonebook are retained.
1. Press , scroll
to
« AdVAnCEd SEt »
and press
OK
2. Scroll
to
« RESEt »
and press
OK
3. The display shows
« RESEt ? »
.
4. Press
OK
to confirm or to return to the previous menu. The phone will
restart automatically.
