12
7.7
Turn on the keypad lock
t
In idle, press and hold
#
to turn on. The
icon is displayed on the LCD
and the screen wil show “
KEYPAD LOCKED
“.
Note:
You can still use or to answer a call when the handset is ringing.
To turn the keypad lock off, press and hold
#
again.
7.8 Redial
You can redial any of the 20 last numbers called. If you have stored a name
in phonebook to go with the number, the name will be displayed instead.
The most recent last number will display at the top of the redial list.
7.8.1 Redial a number from the redial list
t
In idle mode, press
to access the redial list.
t
Press
/
to browse the redial list.
t
Press or to dial to the selected redial number.
Note:
If there are no numbers in the redial list, the display shows “
LIST EMPTY
”.
7.9
Find the handset
You can locate the handset by pressing
on the base station. All the
handsets registered to the base will produce the paging tone and show
“
PAGING
“ on the display.
You can stop the paging by pressing , or on any handset.
Note:
If there is an incoming call during paging, the phone will ring with the
incoming call instead of paging.
7.10
Make an Internal Call
This feature is only applicable when there are at least two registered
handsets. It allows you to make internal calls, transfer external calls from
one handset to another handset and make conference calls.
Note:
If only one handset is registered to the base station, when the soft key is
pressed, it will display “
HANDSET NOT AVAILABLE
”.
