9
UK
Install the base unit in a position where the mains adapter plug will reach
an easily accessible mains socket to unplug in case needed. Never try to
lengthen the mains power cable.
Note:
The base unit needs mains power for normal operation, not just for
charging the handset batteries.
6.2
Installing and charging the batteries (see P3)
t
Place the 2 supplied batteries into the battery compartment with
the polarity markings. Use only the NiMH rechargeable battery type
provided with the telephone.
t
Position the battery compartment cover over the batteries and slide up
to click into place.
t
Put the handset on the base and charge for 1
5
hours before using the
handset for the first time.
>The handset will give a beep when it is properly placed on the base
or charger.
7 TELEPHONE
OPERATION
7.1
Make a call
7.1.1 Preparatory
dialling
t
Enter the phone number and press to connect to the line and dial the
number.
>When entering the number, if you make a mistake, press “ “(
)
to delete digits.
7.1.2 Direct
dialling
t
Press to connect to the line and then enter the phone number.
7.1.3 Call from the phonebook
t
Press , ,
OK
to access the phonebook and press / to select the
desired phonebook entry.
t
Press to dial out the selected phonebook entry.
