5.
If necessary remove fluff from the
filter socket and gasket. You can use
a vacuum cleaner. Put the filter inside
the filter socket.
11.2
Draining the water
container
Drain the condensed water container
after each drying cycle.
If the condensed water container is full,
the programme breaks off automatically.
The indicator
Water container
(Behälter)
is on and you must drain the
water container.
To drain the water container:
1.
Pull the water container and keep it
in horizontal position.
2.
Move the plastic connection out and
drain the water into a basin or
equivalent receptacle.
3.
Move plastic connection in and install
water container.
4.
To continue the programme press
the Start/Pause button.
11.3
Cleaning the heat
exchanger
If the indicator
Heat exchanger
(Kondensator)
flashes, do the inspection
of the heat exchanger and its
compartment. If there is a dirt, clean it.
To do the inspection:
1.
Open the door. Pull the filter.
2.
Move the release button on the
bottom of the door to open the heat
exchanger door.
www.aeg.com
18
