4
11
TIMER Button
- Press to check the duration of the last call, or to restart the timer.
12
FLASH Button
- Press to send a Flash time for PBX.
13
Microphone
14
Handset cord socket on the handset
15
Handset cord socket on the base unit
16
Hook switch
17
Parking
18
Ringer high/low switch
19
Phone line socket on the base unit
5
INSTALLATION
1.
Locating the base unit (See P2 and P3)
The base unit should be placed on a level surface, in a position where:
• the telephone line cable will reach your telephone line socket or extension socket.
• it is not close to a sink, bath or shower, or anywhere else where it might get wet.
• it is not close to other electrical equipment - fridges, washing machines, microwave ovens, TVs,
fluorescent lights, etc.
2.
Plug the coiled handset cord into the handset
14
. Plug the other end into the socket on the
bottom of the base unit
15
.
3.
Place the handset on the base unit.
4.
Plug the telephone line cord into the phone line socket at the back of the base unit
19
and the
other end into your telephone line socket.
5.
Lift the handset and check for dial tone in the earpiece.
