English
33
SR4379CD_IM
22.12.16
the desired track and then press the PROGRAM button
again. The display changes to memory slot 02.
3. Select the next track with the
/
buttons and press
the PROGRAM button again. Repeat the procedure until
all the desired tracks are selected.
NOTE:
If the storage capacity of the titles to be programmed is
reached, the programmed titles will be shown one after
the other. Afterwards the memory location 01 will flash.
4. Press the button (14). The playback starts. The display
shows the first selected title number.
NOTE:
The activated function cannot be shown in the display
for technical reasons.
5. Press once the button to stop the playback while
retaining the program.
6. To play the programme back again, press the button.
7. To delete the program, press the button twice.
The device stops automatically once the entire sequence
of programmed tracks is completed. The programmed
sequence will be deleted from the memory.
Cleaning and Maintenance
CAUTION:
Do
not
immerse the device in water.
• Always remove the mains plug before cleaning the
device.
• Any marks on the surface can be wiped off with a slightly
damp cloth without any additives.
Troubleshooting
Symptoms
Course
Solution
CD can not be
played back.
CD is not insert-
ed or inserted
incorrectly.
Ensure that the disc is
inserted with the label
facing upwards.
Batteries too
weak.
Insert new batteries
or operate the device
with the mains lead.
CD jumps
during play-
back.
Check the disc
for ingerprints,
dirt or scratches.
Check the disc for
ingerprints, dirt or
scratches.
The unit does
not work.
The unit is
blocked and
“hangs”.
Disconnect the mains
plug for approximately
5 seconds. Then switch
the unit back on.
NOTE: Automatic Standby switch
In order to comply with the “ErP 2 (
E
nergy-
r
elated
P
rod-
ucts)” Ecodesign Directive (2009 / 125 / EC) that aims at an
improved energy efficiency and general environmental
compatibility, the device will automatically switch to stand-
by after a certain amount of time without a signal.
Technical Data
Model: ............................................................................SR 4379 CD
Power supply:: .................................................................230 V, 50 Hz
Battery operation: ..................................6 x 1.5 V, Type UM 2 / R 14
Power consumption:................................................................... 9 W
Protection class: ................................................................................
Net weight: .............................................................. approx. 0.94 kg
Radio section:
Frequency ranges:........................................FM 87.5 ~ 108.0 MHz
The right to make technical and design modifications in
the course of continuous product development remains
reserved.
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance
with the latest safety regulations.
Disposal
Meaning of the “Dustbin” Symbol
Protect our environment: do not dispose of
electrical equipment in the domestic waste.
Please return any electrical equipment that
you will no longer use to the collection points
provided for their disposal.
This helps avoid the potential effects of incorrect disposal on
the environment and human health.
This will contribute to the recycling and other forms of re-utili-
sation of electrical and electronic equipment.
Information concerning where the equipment can be dis-
posed of can be obtained from your local authority.
Summary of Contents for SR 4379 CD
Page 44: ...SR4379CD_IM 22 12 16 ...
Page 45: ...SR4379CD_IM 22 12 16 ...
